Coke Fuel: 2011-10-02

Saturday, October 8, 2011

graphite petrolem coke

graphite petrolem coke (GPC)
C:>98.5% Ash<0.8% S<0.05% Mositure<0.5% V.M<0.7%
high carbon
good quality and service
graphite petrolem coke (GPC)
C:>98.5% Ash<0.8% S<0.05%Mositure<0.5% V.M<0.7%
size as you request
high carbon
good quality and service

graphite petrolem coke

graphite

graphite :
F.C 98.5-99%
S:0.5% , Moisture: 0.5%
Ash: 0.5%
Size: 1-5mm or as customers requirement.
pecification of Tennry casting coke:
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%

T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm

Recommended method of application:
A. adjust carbon content while blending, add it into the place below the middle part of the electric furnace along with metal furnace charge when melting down liquid steel(iron) in accordance with the requirement of carbon content, absorptivity of carbon could reach 90%-95%, during strong carburant residue shall not appear, otherwise it is easy to be wrapped in the non-waste residue and influence the absorption of carbon thereby;

Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer's requirement.

graphited carburant

graphited carburant:
F.C 98.5%--99%
S: 0.05%
Ash:0.5%, Moisture: 0.5-3.5%
Size: 1-5mm 2-6mm or as customer requirement.
Recommended method of application:
A. adjust carbon content while blending, add it into the place below the middle part of the electric furnace along with metal furnace charge when melting down liquid steel(iron) in accordance with the requirement of carbon content, absorptivity of carbon could reach 90%-95%, during strong carburant residue shall not appear, otherwise it is easy to be wrapped in the non-waste residue and influence the absorption of carbon thereby;

Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer's requirement.

Specification of Tennry graphited carburant:
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%

T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm
Any other specification of graphited carburant please contact us .

graphited petrolem coke (GPC)

graphited petroleum coke GPC

Graphited petroleum coke GPC :
F.C 98.5-99%
S 0.05% , Moisture: 0.5%
Ash: 0.5%
Size: 1-5mm or as clinets requirement.

Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer’s requirement.

Specification of Tennry graphited petroleum coke GPC:
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%

T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm

Any other specification of carbon additive please contact us .

graphited petroleum coke GPC

Graphited petroleum coke GPC: T9805
F.C 98.5%--99%
S: 0.05% ,Moisture:0.5%
Ash: 0.5%
Size: 1-5mm or as customer requirement
Recommended method of application:
A. adjust carbon content while blending, add it into the place below the middle part of the electric furnace along with metal furnace charge when melting down liquid steel(iron) in accordance with the requirement of carbon content, absorptivity of carbon could reach 90%-95%, during strong carburant residue shall not appear, otherwise it is easy to be wrapped in the non-waste residue and influence the absorption of carbon thereby;

Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer's requirement.

Specification of Tennry graphited petroleum coke GPC:
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%

T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm
Any other specification of carbon additive please contact us .

graphited petroleum coke

We are the biggest manufacturers of graphitied petroleum coke in China.High FC,low S
We can provide high quality petroleum coke , competitive price , Reliable service and timely delivery.
specification of graphited petroleum coke:
FC:98.5%
S:0.05%
ASH:0.8%
M:0.5%
VM:0.7%
SIZE:as your request
It's manily used to additive carbon.
If you have any problem,please contact with me.

graphited petroleum coke

graphited petroleum coke:
F.C 98.5%--99%
S: 0.05% , Moisture: 0.5%
Ash:0.5%
Size: 1-5mm or as customer requirement.
Recommended method of application:
A. adjust carbon content while blending, add it into the place below the middle part of the electric furnace along with metal furnace charge when melting down liquid steel(iron) in accordance with the requirement of carbon content, absorptivity of carbon could reach 90%-95%, during strong carburant residue shall not appear, otherwise it is easy to be wrapped in the non-waste residue and influence the absorption of carbon thereby;

Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer's requirement.

Specification of Tennry graphited petroleum coke:
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%
T9930
99.00%
0.30%
0.50%
0.50%
1-5mm
T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm
Any other specification of graphited petroleum coke please contact us .

graphited petroleum coke

Graphited petroleum coke :
F.C 98.5-99%
S 0.05% ,Moisture:0.5%
Ash: 0.5%
Size: 1-5mm or as customer requirement.

Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer’s requirement.

Specification of Tennry graphited petroleum coke :
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%

T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm

Any other specification of carbon additive please contact us .

Calcined Pet Coke

Used to produce carbon product, like graphite electrode, Anodic arc, and make steel, nonferrous metal, aluminum;
Calcined Pet Coke
Specification:
Fixed Carbon:
98.0%min
Sulpfur:
0.5%max
Ash content
1.0%max
Volatile matter content :
1.0%max
Water content
1.0%max
Size:
0-3MM, 1-5MM, 5-15MM, -200MESH, -300MESH/According to buyer’s option
Application:
Used to produce carbon product, like graphite electrode, Anodic arc, and make steel, nonferrous metal, aluminum;
Used to produce carbonized silicon product, like grinding wheel, rubber, sand paper, ect;
Used to produce calcium carbide which is use to synthesize fiber, acetylene and so on;
As fuel in making calcareousness and foundry industry.
Packing:
In about 1MT bag or paper bag into 1MT bag or in 25Kg plastic woven bag.

graphited petroleum coke

Graphited petroleum coke :
F.C 98.5-99%
S 0.05% ,Moisture: 0.5%
Ash: 0.5%
Size: 1-5mm or as clinets requirement.

Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer’s requirement.

Specification of Tennry carburant:
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%

T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm

Any other specification of Graphited petroleum coke please contact us .

graphited petroleum coke

Graphited petroleum coke :
F.C 98.5-99%
S 0.05% , Moisture:0.5%
Ash: 0.5%
Size: 1-5mm or as clinets requirement.
Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer’s requirement.

Specification of Tennry graphited petroleum coke:
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%

T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm

Any other specification of graphited petroleum coke please contact us .

graphitized petroleum coke

graphitized petroleum coke is used for Ductile Cast iron industry. with high carbon content(99% Min.) and low sulphur(0.05%Max.)
Duratight graphitized petroleum coke(GPC)made from high quality carbon material, after the process of desulfurizing and grain size classification, is a new product for improving techniques and steel quality in steel-smelting industry .DT-CA-09 F.C.98.50% S 0.05% ASH 0.80%V.M. 0.70% M 0.50%SIZE 0.3-5MM N:0.03%
Duratight graphitized petroleum coke / carbon additive/carburetant/carbon riser is the excellent casting material, which has been extensively used steels and castings. Carbon additive/carburetant/carbon riser can regulate carbon content in iron castings for different properties. Duratight carbon additive has features of high carbon, low sulphur.

Duratight provides graphite powder, electrode scrap, graphitized petroleum coke, and graphite powder. Duratight graphite powder has features of high carbon, low sulphur, which has been extensively used in metallurgy, casting and steel industries and used in brake pads and friction material field.

graphitized petroleum coke

C:98.5%/99% min
S:0.05% Max./2%/3%/4.5% 5% 5.5%
Ash:0.5% Max.
Stable quality and stable supply
C:98.5%/99% min
S:0.05% Max.
Ash:0.5% Max.
V.M:0.5% Max.
Moisture:0.5% Max.
Szie:0-5mm/1-5mm/5-10mm/ or on your option.
Packing:In 1 MT Bags.
This is the high grade carbon additive for cast iorns or Steel furnaces.
And the high sulphur CPC is widly used in aluminium industry.

graphitized petroleum coke

Graphitized Petroleum Coke specification:
FC: 98.5%min, S: 0.05% max, M: 0.5% max, Ash: 0.8% max, V.M.: 0.8% max
Graphitized petroleum coke

Item
F.C
98.5%,
Min.
1
Sulphur
0.05%
Max.
2
Ash
0.8%
Max.
3
V.M.
0.8%
Max.
4
Moisture
0.5%
Max.
The size varies such as 1-5mm, 5-10mm,0.5-5mm etc. We always process according to customers requirement.

graphitized petroleum coke

FC: 98.5%min, S: 0.05% max, M: 0.5% max, Ash: 0.8% max, V.M.: 0.8% max
Graphitized petroleum coke

Item
F.C
98.5%,
Min.
1
Sulphur
0.05%
Max.
2
Ash
0.8%
Max.
3
V.M.
0.8%
Max.
4
Moisture
0.5%
Max.
The size varies such as 1-5mm, 5-10mm,0.5-5mm etc. We always process according to customers requirement.

green petroleum coke-2011 hot sale

green petroleum coke
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
green petroleum coke-2011 hot sale
Graphite petroleum coke:
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
Quick Details

green petroleum coke
:
F. C.: 80%; S:0.5%; V. M.: 10%max; Ash: 0.5%max; Moisture: 8%max; Size: 1-5mm
By using the green petroleum coke from QJ in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, QJ calcined petroleum coke has follow properties ; high absorptive character, no residue will be left, save production cost.
1,
Usage
:used to improve the Carbon content in steel-melting and Ductile iron foundry
2,
Characteristic
:high carbon, low sulfur, with stable effect for improving the carbon content, high absorptive of carbon.
3,
apply
: Used in electric furnace steel smelting and cast-iron for improving the carbon content
4,
Grain size
:normal size:0.3-3mm 1-4mm,1-3mm,3-5mm,3-8mm,5-10mm or per as customer’s special requirement.
Petroleum coke

Place of Origin:
Henan China (Mainland)
Brand Name:
QJ
Model Number:
QJ-41
Application:
Iron and casting
Shape:
Carbon Blocks
Dimensions:
1-5mm
Product Type:
Carbon Additive
C Content (%):
98%
Working Temperature:
1600°C
S Content (%):
0.05%MAX
N Content (%):
0.3%
Ash Content (%):
0.5%
Volatile:
0.5%
color:
Black
material:
Carbon
Packaging & Delivery
Packaging Detail:
Waterproof ton bags (with small bag inside) 2.20kgs/25kgs paper bag, 40 bags in one MT-bag 3.20kgs/25kgs/30kgs waterproof PP Woven Bag bags, 1000kg in one MT-bag
Delivery Detail:
30Days

green petroleum coke

green petroleum coke
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
green petroleum coke
Graphite petroleum coke:
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
Quick Details

green petroleum coke
:
F. C.: 80%; S:0.5%; V. M.: 10%max; Ash: 0.5%max; Moisture: 8%max; Size: 1-5mm
By using the green petroleum coke from QJ in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, QJ calcined petroleum coke has follow properties ; high absorptive character, no residue will be left, save production cost.
1,
Usage
:used to improve the Carbon content in steel-melting and Ductile iron foundry
2,
Characteristic
:high carbon, low sulfur, with stable effect for improving the carbon content, high absorptive of carbon.
3,
apply
: Used in electric furnace steel smelting and cast-iron for improving the carbon content
4,
Grain size
:normal size:0.3-3mm 1-4mm,1-3mm,3-5mm,3-8mm,5-10mm or per as customer’s special requirement.
Petroleum coke

Place of Origin:
Henan China (Mainland)
Brand Name:
QJ
Model Number:
QJ-41
Application:
Iron and casting
Shape:
Carbon Blocks
Dimensions:
1-5mm
Product Type:
Carbon Additive
C Content (%):
98%
Working Temperature:
1600°C
S Content (%):
0.05%MAX
N Content (%):
0.3%
Ash Content (%):
0.5%
Volatile:
0.5%
color:
Black
material:
Carbon
Packaging & Delivery
Packaging Detail:
Waterproof ton bags (with small bag inside) 2.20kgs/25kgs paper bag, 40 bags in one MT-bag 3.20kgs/25kgs/30kgs waterproof PP Woven Bag bags, 1000kg in one MT-bag
Delivery Detail:
30Days

green petroleum coke

best quality and best price
green petroleum coke
origin: China
specifications:

F C 88%

ASH 1%MAX

S 0.7%MAX

SIZE 5-20MM(according to buyer's requirements)

Calcined Petroleum Coke (Carbon Additive)

For the international market, we guarantee high quality,competitive price and consistent supply!
Specifications
F.C.: 98.5%min
ASH: 0.8%max
V.M.: 0.7%max
S: 0.5%max
MOISTURE: 0.5%max
SIZE: 1--5mm 90%min; 3--10mm 90%min; 5--15mm 90%min

green petroleum coke

green petroleum coke
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
petroleum coke in energy
Graphite petroleum coke:
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
Quick Details

green petroleum coke
:
F. C.: 80%; S:0.5%; V. M.: 10%max; Ash: 0.5%max; Moisture: 8%max; Size: 1-5mm
By using the green petroleum coke from QJ in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, QJ calcined petroleum coke has follow properties ; high absorptive character, no residue will be left, save production cost.
1,
Usage
:used to improve the Carbon content in steel-melting and Ductile iron foundry
2,
Characteristic
:high carbon, low sulfur, with stable effect for improving the carbon content, high absorptive of carbon.
3,
apply
: Used in electric furnace steel smelting and cast-iron for improving the carbon content
4,
Grain size
:normal size:0.3-3mm 1-4mm,1-3mm,3-5mm,3-8mm,5-10mm or per as customer’s special requirement.
Petroleum coke

Place of Origin:
Henan China (Mainland)
Brand Name:
QJ
Model Number:
QJ-41
Application:
Iron and casting
Shape:
Carbon Blocks
Dimensions:
1-5mm
Product Type:
Carbon Additive
C Content (%):
98%
Working Temperature:
1600°C
S Content (%):
0.05%MAX
N Content (%):
0.3%
Ash Content (%):
0.5%
Volatile:
0.5%
color:
Black
material:
Carbon
Packaging & Delivery
Packaging Detail:
Waterproof ton bags (with small bag inside) 2.20kgs/25kgs paper bag, 40 bags in one MT-bag 3.20kgs/25kgs/30kgs waterproof PP Woven Bag bags, 1000kg in one MT-bag
Delivery Detail:
30Days

green petroleum coke

green petroleum coke
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
green petroleum coke
Detailed Product Description
Graphite petroleum coke:
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
Quick Details
Petroleum coke

Place of Origin:
Henan China (Mainland)
Brand Name:
QJ
Model Number:
QJ-41
Application:
Iron and casting
Shape:
Carbon Blocks
Dimensions:
1-5mm
Product Type:
Carbon Additive
C Content (%):
98%
Working Temperature:
1600°C
S Content (%):
0.05%MAX
N Content (%):
0.3%
Ash Content (%):
0.5%
Volatile:
0.5%
color:
Black
material:
Carbon
Packaging & Delivery
Packaging Detail:
Waterproof ton bags (with small bag inside) 2.20kgs/25kgs paper bag, 40 bags in one MT-bag 3.20kgs/25kgs/30kgs waterproof PP Woven Bag bags, 1000kg in one MT-bag
Delivery Detail:
30Days

handhold ultrasonic energy flow meter/transi-time ultrasonic flow meter-AFV5G

1.handheld ultrasonic flow meter
2.hand hold tansit-time ultrasonic flowmeter
3.no interruption of the process flow
handhold ultrasonic flow meter/ultrasonic water Flow meter/ Leak detection Flow meter / Hand hold transit-time ultrasonic flow meter AFV-5G

General
AFV-5G is a hand hold transit-time ultrasonic flow meter with clamp-on transducers for non-invasive liquid measurement. Our microprocessor based, user friendly, field programmable flow measurement technique allows no interruption of the process flow and has low installation costs.

Features
4 line LCD display with flow mate, totalize and signal condition
the flow meter is designed for high accuracy +/-1.0%
small size (200*92*32mm) light weight ( 538 g )
wide range, velocities ( 0.01-+/-32 m/s)
Ni-MH battery life for up to 10 hours continuous operation.
transducers for pipe sizes of 13 to 6000 mm
transducers include magnet devise with can install on metal pipe without mounting belt
Date logger which records flow mate, date, total flow, signal condition etc.
response time: less than 1 second

Specification

Measuring Principle: Transit time difference
Pipe size: SS Type: 15 mm~100mm (1/2" ~4" )
M Type: 50mm ~ 700 mm (2"~28")
L Type: 300 mm~600mm (12"~240")
Resolution: 0.0001 m/s
Pipe Material: Cast Iron, Stainless steel, Ductile Iron, Copper, PVC, Aluminum, Asbestos Fiberglass
Keypad: 18 key with tactile action
Response time : Less than 1 second
Ambient Temperature: -20~+50 °C
Ambient Humidity: 90% RH or less
Built in Battery: Ni-MH battery
Operation Time: >10 Hours
Liner Material: Tar Epoxy, Rubber, Mortar, Polypropylene, Polystyrol, Polystyrene, Polyester, Ebonite, Polyethylene, Teflon…etc.
Display: 4 Line LCD with illumination
Flow mate: 5 digit with decimal point
Totalize: 8 digit, Forward, Reverse & Net values
Engineer Unit: M3, Liter, US Gallon, Imperial Gallon, Million Gallon, Cubic Feet, US Barrels, Imperial Barrels, Oil Barrel
Time Unit: Second, Minute, Hour, Day
Other: Velocity, Date, Time, Signal condition
Accuracy: +/-1% ~+/-2% of reading (0.5~30 m/s)
+/-0.5% of reading (online calibration)
Repeatability: +/-0.2% of reading
Charger: 90~260Vac 50/60 Hz, 8-12 Hr charging
Data Storage: Operation parameters and totalization data are stored by EEPRPM for more than 10 years
Data Logger: 64 data include flow mate, totalizer, time, date
Alarm: High/ Low with buzzer
Power consumption: less than 2 W
Dimension: 200*92*32
Weight: 0.54 KG
Enclosure: Converter: IP65
Sensor: IP68 (Submersible)

high carbon recarburizer

1.high carbon and low sulfur
2.widely used in steelworks
3.good quality and resonable price
4.stable production line &ability
ITEMS
UNIT
BRAND
CA-1
CA-2
CA-3
CA-4
Water
MAX
%
0.5
0.5
0.5
0.5
Volatile
MAX
%
0.6
1.0
1.2
1.5
Sulfur
MAX
%
0.5
0.4
0.3
0.2
N
MAX
%
0.8
0.4
0.3
0.2
ASH
MAX
%
0.5
3.0
4.0
8.0
F.C.
MIN
%
98.0
94.0
92.0
90.0

Calcined petroleum coke /CPC
Other name: CPC,carbon additive, carburizer, carbon raiser, carburant.
Calcined petroleum coke
calcined petroleum coke is use as the carbon additive in steel mills and foundry plants made cathode or anode for Aluminum plant
Widely used in steel-metallurgy as the raw-material of graphite electrode, in aluminum-metallurgy as carbon resources and the stuff of graphite paste for electrobath. It is also used to make carborundum, calcium carbide and other carbon products.

high carbon low sulfur carburizer

high quality calcined petroleum coke

CPC Calcined petroleum coke:
FC: 98.5%min
Sulphur: 0.5% max
Moisture: 0.5% max
High quality, better service, low price.
CPC low sulphur
calcined petroleum coke:
FC: 98.5%min
Sulphur: 0.5% max
Moisture: 0.5% max
Size: subject to customers` requirements.
Packing: subject to the customers` requirements.
Quantity : available on request
Origin: Panjin China
Delivery time: available on request
Delivery condition:
CIF &FOB or upon client`s request
FOB at Dalian Port ,BaYuquan Port, JinZhou Port,Tianjing Port
Price:different upon your ordered size
Payment terms: LC at sight or T/T 30% in advance
PANJIN G-HIGH CARBON specializes in producing calcined petroleum coke and other carbon products, hoping to build the cooperation with you.

Friday, October 7, 2011

high quality calcined petroleum coke

high quality carbon additive

carbon additive /CPC Calcined petroleum coke:
FC: 98.5%min
S: 0.5% max
M: 0.5% max
Size: subject to customers` requirements
carbon additive
CPC low sulphur
calcined petroleum coke:

FC: 98.5%min
Sulphur: 0.5% max
Moisture: 0.5% max
Size: subject to customers` requirements.
Packing: subject to the customers` requirements.
Quantity : available on request
Origin: Panjin China
Delivery time: available on request
Delivery condition:
CIF &FOB or upon client`s request
FOB at Dalian Port ,BaYuquan Port, JinZhou Port,Tianjing Port
Price:different upon your ordered size
Payment terms: LC at sight or T/T 30% in advance
PANJIN G-HIGH CARBON specializes in producing calcined petroleum coke and other carbon products, hoping to build the cooperation with you.

high quality graphitized petroleum coke with the third party's certifiate

graphitized petroleum coke
1.good quality with third party's certificate
2.good communication
3.FCC RoHs save payment

graphitized petroleum coke
Graphitized petroleum coke,Calcined petroleum coke,Graphite Petroleum Coke
Specifications:
FC: 98.5% Min
S : 0.5 % Max
Ash: 0.8% Max
VM : 0.6 % Max
Moisture: 0.5% Max
Size: 0.5- 5 mm ( 90 % Min) or as your demand
Main Products:
raw petroleum coke,calcined petroleum coke,carbon additive

My company production of friction materials for petroleum coke,it selects and uses high grade oil coke and completed after 1300high temperature calcining through 8 fire-ways and 24 calciners.
Product has the following features:
(1) It is characterized by less density,Loose texture and porous.
(2) High carbon,a less volatile,the chemical and physical properties is very stable.
(3) And according to the foreign material and product manufacturing, and the strict screening, have fixed the grain size composition is especially suitable for friction materials and application effect.
(4)Friction material used petroleum coke can Lower density,Improve product porosity and compression performance.
Thereby improving brake friction performance and stability of comfort and process performance.

Application
1.this product can be used in steel producing as a kind of carbon additive
2.we can get high quality steel if use it .
3.it can also be used in special steel producing and casting or other related industry
4.It can be used as carbon raiser (Recarburizer) to produce high quality steel,cast iron and alloy.
5.It can also be used in plastic and rubber as an additive.
It can be used as carbon raiser (Recarburizer) to produce high quality steel,cast iron and alloy.It can also be used in plastic and rubber as an additive.

high quality low sulfur petroleum coke

we have best supplier
our raw material is high-quality low sulfur petcoke
the cost performance of our product is high
petroleum coke specification
Property
Unit
Range
Standard
Sulfur
%
0.5
SH/T 0033
Volatile matter
%
12
SH/T 0032
Ash
%
0.5
GB/T 387
Moisture
%
11
SH/T 0029
Real density
g/cm
3
2.30
SH/T 0026
Size smaller than
8mm
%
37.00
——
Petroleum coke (Pet coke/Petcoke)is a solid high carbon material which is produced as a by-product of the oil refining process. The chief constituent of petroleum coke is hydrocarbon (carbon content of 90-97%, hydrogen content of 1.5-8%), but it also contains nitrogen, chlorine, sulfur compounds and heavy metals. So the color of petroleum coke is black or dark gray.
According to different quality, the petroleum coke can be used in manufacturing graphite, metal smelting industry and chemical industry. The main product of our company is high-quality low sulfur coke (the sulfur content of less than 0.5%) that is mainly used in preparing high power graphite electrode for the steel and aluminium industries and producing some special carbon products. And it is particularly valuable because the electrodes must be replaced regularly and the coke is produced exclusively from sweet crude oil, which is in diminishing supply.

10-25mm met coke

our met coke is best quality , competitive price
[1]Met Coke
In a coke furnace, coal is heated indirectly (for 14 to 18 hours at 1,200 to 1,300°C) and then carbonized (dried by distillation) for about 24 hours.
Subsequently, it is fractionated into coke and other materials, such as gases, tar oil, benzene, toluene, and naphthalene.
Metallurgical coke has an 85 to 90% fixed carbon content.
[2] specification
F.C.: 85% MIN ASH: 13% MAX SULFUR :0.7% MAX
V.M. :1.5 MAX MOISTURE : 6% MAX
M40 : 78%-83% MIN
M10 : 8%-10% MAX
CSR : 62% MIN
CRI (≤ %) : 23% MIN
Size:10-25mm 90%min

if you are interested , please inform us as sonn as possible

Calcined Petroleum Coke 98.5%min

We supply CPC for a long time with stable resourse.
Calcined Petroleum Coke widely used in steel-metallurgy as the raw material of graphite electrode, in aluminum metallurgy as carbon resources and the stuff of graphite paste for electro bath. It is also used to make carborundum, calcium carbide and other carbon products.

Calcined Petroleum Coke
Fixed C: 98.5 % Min,
S: 0.5%, 1% etc.
Total Humidity: 0.5%max,
VM: 0.7%max,
Ash: 0.4%max,
Sizing: 0-5mm, 1-5mm, or subject to customer's requirement
Packing: 25kg PP bag, 1MT jumbo bag

high quality oil coke with the third party's certificate

oil coke
1.good quality with the third party's certificate
2.lowest freight and fast delivery
3.reliable and experienced

oil coke
oil coke,Calcined petroleum coke,Graphite Petroleum Coke
Specifications:
FC: 98.5% Min
S : 0.5 % Max
Ash: 0.8% Max
VM : 0.6 % Max
Moisture: 0.5% Max
Size: 0.5- 5 mm ( 90 % Min) or as your demand
Main Products:
raw petroleum coke,calcined petroleum coke,carbon additive

My company production of friction materials for petroleum coke,it selects and uses high grade oil coke and completed after 1300high temperature calcining through 8 fire-ways and 24 calciners.
Product has the following features:
(1) It is characterized by less density,Loose texture and porous.
(2) High carbon,a less volatile,the chemical and physical properties is very stable.
(3) And according to the foreign material and product manufacturing, and the strict screening, have fixed the grain size composition is especially suitable for friction materials and application effect.
(4)Friction material used petroleum coke can Lower density,Improve product porosity and compression performance.
Thereby improving brake friction performance and stability of comfort and process performance.

Application
1.this product can be used in steel producing as a kind of carbon additive
2.we can get high quality steel if use it .
3.it can also be used in special steel producing and casting or other related industry
4.It can be used as carbon raiser (Recarburizer) to produce high quality steel,cast iron and alloy.
5.It can also be used in plastic and rubber as an additive.
It can be used as carbon raiser (Recarburizer) to produce high quality steel,cast iron and alloy.It can also be used in plastic and rubber as an additive.

high-quality low sulfur coke petroleum coke

low Sulphur met coke

best quality ,competitve price , best service
[1]Met Coke
In a coke furnace, coal is heated indirectly (for 14 to 18 hours at 1,200 to 1,300°C) and then carbonized (dried by distillation) for about 24 hours.
Subsequently, it is fractionated into coke and other materials, such as gases, tar oil, benzene, toluene, and naphthalene.
Metallurgical coke has an 85 to 90% fixed carbon content.
[2] specification
F.C.: 86% MIN ASH: 12.5% MAX SULFUR :0.6% MAX
V.M. :1.3 MAX MOISTURE : 6% MAX
M40 : 78%-83% MIN
M10 : 8%-10% MAX
CSR : 62% MIN
CRI (≤ %) : 23% MIN
Size:50-100mm 90%min

if you are interested , please inform us as sonn as possible

low ash low s Metallurgical and foundary coke

we have own coke plants at Shanxi province.Provided all kinds of coke,advantages of low ash, low sulphur and high carbon.
1 Commodity name: Metallurgical Coke
2 specifications
F.C.: 86% min
Ash: 12.5% max
Sulfur : 0.6% max
V.M. :1.3 max
Moisture : 6% max
M40 : 78%-83% min
M10 : 8%-10% max
CSR : 62% min
CRI (≤ %) : 23% min
Size: According to buyer's requirement.

low ash met coke 30-90mm

we can supply u 30-90mm met coke with best price .
WE, , XIWO INDUSTRIAL(HONGKONG)LIMITED. HEREBY CONFIRM, STATE AND REPRESENT WITH FULL CORPORATE AUTHORITY, THATWE ARE READY, WILLING AND ABLE TO SELL METALLURGICAL COKE BULK IN QUANTITY AND AS PER THE SPECIFICATIONS BELOW:
SPECIFICATION 1:

F.C.: 86% MIN ASH: 12.5% MAX SULFUR :0.6% MAX
V.M. :1.3 MAX MOISTURE : 6% MAX
M40 : 78%-83% MIN
M10 : 8%-10% MAX
CSR : 62% MIN
CRI (≤ %) : 23% MIN
Size:30-90mm 90%min
Quantity:2000mt
Price : FOB TIANJIN XINGANG 535usd
LOADING PORT: TIANJIN XINGANG PORT

low ash met coke 30-90mm

we can supply u 30-90mm met coke with best price .
WE, , XIWO INDUSTRIAL(HONGKONG)LIMITED. HEREBY CONFIRM, STATE AND REPRESENT WITH FULL CORPORATE AUTHORITY, THATWE ARE READY, WILLING AND ABLE TO SELL METALLURGICAL COKE BULK IN QUANTITY AND AS PER THE SPECIFICATIONS BELOW:
SPECIFICATION 1:

F.C.: 86% MIN ASH: 12.5% MAX SULFUR :0.6% MAX
V.M. :1.3 MAX MOISTURE : 6% MAX
M40 : 78%-83% MIN
M10 : 8%-10% MAX
CSR : 62% MIN
CRI (≤ %) : 23% MIN
Size:50-100mm 90%min
Quantity:2000mt
Price : FOB TIANJIN XINGANG 535usd
LOADING PORT: TIANJIN XINGANG PORT

low ash met coke

we can supply you good quality with best price met coke
1 product name : metallurgical coke
2 origin: shanxi,China
3 specifications:
ash 10%max

s 0.6%max

vm 1.5%max

size 90-150mm

low ash met coke

"Shanxi province,China" Met Coke
we have our factory in shanxi , if you are interested , please contact me asap.

Application
Steel industry/ferroalloy industry/foundries/non-ferrous metal refineries

low ash met coke specifications:
F.C.: 86% MIN ASH: 12.5% MAX SULFUR :0.6% MAX
V.M. :1.3 MAX MOISTURE : 6% MAX
M40 : 78%-83% MIN
M10 : 8%-10% MAX
CSR : 62% MIN
CRI (≤ %) : 23% MIN
Size:50-100mm 90%min

low ash metallurgical coke

we can supply u best quality , competitive price
WE, , XIWO INDUSTRIAL(HONGKONG)LIMITED. HEREBY CONFIRM, STATE AND REPRESENT WITH FULL CORPORATE AUTHORITY, THATWE ARE READY, WILLING AND ABLE TO SELL METALLURGICAL COKE BULK IN QUANTITY AND AS PER THE SPECIFICATIONS BELOW:

F.C.: 86% MIN ASH: 12.5% MAX SULFUR :0.6% MAX
V.M. :1.3 MAX MOISTURE : 6% MAX
M40 : 78%-83% MIN
M10 : 8%-10% MAX
CSR : 62% MIN
CRI (≤ %) : 23% MIN
Size:30-90mm 90%min
Quantity:2000mt
Price : FOB TIANJIN XINGANG 535usd
LOADING PORT: TIANJIN XINGANG PORT

Calcined Petroleum Coke/CPC

Calcined Petroleum Coke/CPC
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
2011 hot sale petroleum coke
Detailed Product Description
Graphite petroleum coke:
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
Quick Details
Petroleum coke

Place of Origin:
Henan China (Mainland)
Brand Name:
QJ
Model Number:
QJ-41
Application:
Iron and casting
Shape:
Carbon Blocks
Dimensions:
1-5mm
Product Type:
Carbon Additive
C Content (%):
98%
Working Temperature:
1600°C
S Content (%):
0.05%MAX
N Content (%):
0.3%
Ash Content (%):
0.5%
Volatile:
0.5%
color:
Black
material:
Carbon
Packaging & Delivery
Packaging Detail:
Waterproof ton bags (with small bag inside) 2.20kgs/25kgs paper bag, 40 bags in one MT-bag 3.20kgs/25kgs/30kgs waterproof PP Woven Bag bags, 1000kg in one MT-bag
Delivery Detail:
30Days

low s met coke from shanxi in China

origin: shanxi
spec:
FC 86%
ash 12%
s 0.6%
1 product name : metallurgical coke
2 origin: Shanxi, China
2 specifications

FC 86%
ash 12%
s 0.6%
size 30-90mm

low sulfur calcined petroleum coke

we have best supplier
our raw material is high-quality low sulfur petcoke
the cost performance of our product is high
Calcined petroleum coke specification
Property
Unit
Range
Standard
Real density
g/cm
2
2.0812
SH/T 0033
Moisture
WT%
0.5
SH/T 0032
Sulfur
WT%
0.5
GB/T 387
Ash
WT%
0.5
SH/T 0029
Volatile matter
WT%
0.6
SH/T 0026
Iron
WT%
0.165
ICP
Silicon
WT%
0.025
ICP
Vanadium
WT%
0.003
ICP
Titanium
WT%
0.016
ICP
Nickel
WT%
0.013
ICP
Sodium
WT%
0.028
ICP
The graphite electrodes used in steel and aluminum industry, with magnesium anode paste (melting electrode), the order to make petroleum coke (coke) to adapt to the requirements must be carried out on calcined coke. Calcination temperature is normally about 1300 °C, for the purpose of petroleum coke as much as possible to remove the volatile matter. This will help to reduce petroleum coke and then the hydrogen content of products, so that the graphitization of petroleum coke increased, thereby enhancing the strength of graphite electrodes and the high-temperature heat resistance and improve the electrical conductivity of the graphite electrode. Mainly used in the production of calcined coke graphite electrode, carbon paste products, carborundum, food-grade phosphate industry, metallurgical industry and calcium carbide and so on, which is the most widely used graphite electrodes. Aluminum industry consumed about calcined coke calcined coke consumption in the world of 75%. Per ton of aluminum production will consume about 0.4 tons of carbon anode. Aluminum industry consumes most of the calcined petroleum coke, and the remaining 25% of the calcined petroleum coke is used: the production of titanium dioxide, iron and steel and other chemical production process.

low sulfur calcined petroleum coke

we have best supplier
our raw material is high-quality low sulfur petcoke
the cost performance of our product is high

Calcined petroleum coke specification
Property
Unit
Range
Standard
Real density
g/cm
2
2.0812
SH/T 0033
Moisture
WT%
0.5
SH/T 0032
Sulfur
WT%
0.5
GB/T 387
Ash
WT%
0.5
SH/T 0029
Volatile matter
WT%
0.6
SH/T 0026
Iron
WT%
0.165
ICP
Silicon
WT%
0.025
ICP
Vanadium
WT%
0.003
ICP
Titanium
WT%
0.016
ICP
Nickel
WT%
0.013
ICP
Sodium
WT%
0.028
ICP

The graphite electrodes used in steel and aluminum industry, with magnesium anode paste (melting electrode), the order to make petroleum coke (coke) to adapt to the requirements must be carried out on calcined coke. Calcination temperature is normally about 1300 °C, for the purpose of petroleum coke as much as possible to remove the volatile matter. This will help to reduce petroleum coke and then the hydrogen content of products, so that the graphitization of petroleum coke increased, thereby enhancing the strength of graphite electrodes and the high-temperature heat resistance and improve the electrical conductivity of the graphite electrode. Mainly used in the production of calcined coke graphite electrode, carbon paste products, carborundum, food-grade phosphate industry, metallurgical industry and calcium carbide and so on, which is the most widely used graphite electrodes. Aluminum industry consumed about calcined coke calcined coke consumption in the world of 75%. Per ton of aluminum production will consume about 0.4 tons of carbon anode. Aluminum industry consumes most of the calcined petroleum coke, and the remaining 25% of the calcined petroleum coke is used: the production of titanium dioxide, iron and steel and other chemical production process.

low sulfur petroleum coke-hot sale

low sulfur petroleum coke
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
sulfur less than 0.50%
volatile matter less than 12.00%
ash less than 0.30%
moisture less than 3%
real density abuot 2.30
petroleum coke specification
Property
Unit
Range
Standard
Sulfur
%
0.5
SH/T 0033
Volatile matter
%
12
SH/T 0032
Ash
%
0.5
GB/T 387
Moisture
%
11
SH/T 0029
Real density
g/cm
3
2.30
SH/T 0026
Size smaller than
8mm

%
37.00
——
Petroleum coke (Pet coke/Petcoke)is a solid high carbon material which is produced as a by-product of the oil refining process. The chief constituent of petroleum coke is hydrocarbon (carbon content of 90-97%, hydrogen content of 1.5-8%), but it also contains nitrogen, chlorine, sulfur compounds and heavy metals. So the color of petroleum coke is black or dark gray.
According to different quality, the petroleum coke can be used in manufacturing graphite, metal smelting industry and chemical industry. The main product of our company is high-quality low sulfur coke (the sulfur content of less than 0.5%) that is mainly used in preparing high power graphite electrode for the steel and aluminium industries and producing some special carbon products. And it is particularly valuable because the electrodes must be replaced regularly and the coke is produced exclusively from sweet crude oil, which is in diminishing

low sulfur petroleum coke

sulfur less than 0.50%
volatile matter less than 12.00%
ash less than 0.30%
moisture less than 3%
real density abuot 2.30
petroleum coke specification
Property
Unit
Range
Standard
Sulfur
%
0.5
SH/T 0033
Volatile matter
%
12
SH/T 0032
Ash
%
0.5
GB/T 387
Moisture
%
11
SH/T 0029
Real density
g/cm
3
2.30
SH/T 0026
Size smaller than
8mm
%
37.00
——
Petroleum coke (Pet coke/Petcoke)is a solid high carbon material which is produced as a by-product of the oil refining process. The chief constituent of petroleum coke is hydrocarbon (carbon content of 90-97%, hydrogen content of 1.5-8%), but it also contains nitrogen, chlorine, sulfur compounds and heavy metals. So the color of petroleum coke is black or dark gray.
According to different quality, the petroleum coke can be used in manufacturing graphite, metal smelting industry and chemical industry. The main product of our company is high-quality low sulfur coke (the sulfur content of less than 0.5%) that is mainly used in preparing high power graphite electrode for the steel and aluminium industries and producing some special carbon products. And it is particularly valuable because the electrodes must be replaced regularly and the coke is produced exclusively from sweet crude oil, which is in diminishing supply.
After calcining at high temperature, Petroleum coke can be transformed into Calcined Petroleum Coke(CPC)which is the important raw material of electrode paste and pre-baked anode.

low sulfur petroleum coke

we have best supplier
our raw material is high-quality low sulfur petcoke
the cost performance of our product is high
petroleum coke specification
Property Unit Range Standard
Sulfur % 0.5 SH/T 0033
Volatile matter % 12 SH/T 0032
Ash % 0.5 GB/T 387
Moisture % 11 SH/T 0029
Size smaller than 8mm % 37.00 ——

Petroleum coke (Pet coke/Petcoke)is a solid high carbon material which is produced as a by-product of the oil refining process. The chief constituent of petroleum coke is hydrocarbon (carbon content of 90-97%, hydrogen content of 1.5-8%), but it also contains nitrogen, chlorine, sulfur compounds and heavy metals. So the color of petroleum coke is black or dark gray.
According to different quality, the petroleum coke can be used in manufacturing graphite, metal smelting industry and chemical industry. The main product of our company is high-quality low sulfur coke (the sulfur content of less than 0.5%) that is mainly used in preparing high power graphite electrode for the steel and aluminium industries and producing some special carbon products. And it is particularly valuable because the electrodes must be replaced regularly and the coke is produced exclusively from sweet crude oil, which is in diminishing supply.
After calcining at high temperature, Petroleum coke can be transformed into Calcined Petroleum Coke(CPC)which is the important raw material of electrode paste and pre-baked anode.

low sulfur petroleum coke

sulfur less than 0.50%
volatile matter less than 12.00%
ash less than 0.50%
moisture less than 11%
real density abuot 2.30
petroleum coke specification
Property
Unit
Range
Standard
Sulfur
%
0.5
SH/T 0033
Volatile matter
%
12
SH/T 0032
Ash
%
0.5
GB/T 387
Moisture
%
11
SH/T 0029
Real density
g/cm
3
2.30
SH/T 0026
Size smaller than
8mm
%
37.00
——
Petroleum coke (Pet coke/Petcoke)is a solid high carbon material which is produced as a by-product of the oil refining process. The chief constituent of petroleum coke is hydrocarbon (carbon content of 90-97%, hydrogen content of 1.5-8%), but it also contains nitrogen, chlorine, sulfur compounds and heavy metals. So the color of petroleum coke is black or dark gray.
According to different quality, the petroleum coke can be used in manufacturing graphite, metal smelting industry and chemical industry. The main product of our company is high-quality low sulfur coke (the sulfur content of less than 0.5%) that is mainly used in preparing high power graphite electrode for the steel and aluminium industries and producing some special carbon products. And it is particularly valuable because the electrodes must be replaced regularly and the coke is produced exclusively from sweet crude oil, which is in diminishing supply.
After calcining at high temperature, Petroleum coke can be transformed into Calcined Petroleum Coke(CPC)which is the important raw material of electrode paste and pre-baked anode.

low sulfur petroleum coke

low sulfur steel pet coke

1.high carbon and low sulfur
2.widely used in steelworks
3.good quality and resonable price
4.stable production line &ability
ITEMS
UNIT
BRAND
CA-1
CA-2
CA-3
CA-4
Water
MAX
%
0.5
0.5
0.5
0.5
Volatile
MAX
%
0.6
1.0
1.2
1.5
Sulfur
MAX
%
0.5
0.4
0.3
0.2
N
MAX
%
0.8
0.4
0.3
0.2
ASH
MAX
%
0.5
3.0
4.0
8.0
F.C.
MIN
%
98.0
94.0
92.0
90.0
calcined petroleum coke is use as the carbon additive in steel mills and foundry plants made cathode or anode for Aluminum plant
Widely used in steel-metallurgy as the raw-material of graphite electrode, in aluminum-metallurgy as carbon resources and the stuff of graphite paste for electrobath. It is also used to make carborundum, calcium carbide and other carbon products.

low sulphur carbon additive

low sulphur carbon additive:
F.C 98.5-99%
S 0.05% ,Moisture: 0.5%
Ash:1-5mm
Size: 1-5mm or as clinets requirement.
carbon additive characteristics and application scope: high content of fixed carbon, low sulfur content, stable carburetion effect and high absorptivity of carbon, best degree of graphitization, improve the nucleation of melted iron, it is mainly applied to the carburetion of various electro-smelting cast steel and iron casting.

Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer’s requirement.

Specification of Tennry carbon additive:
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%

T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm

Any other specification of carbon additive please contact us .

Calcined Petroleum Coke/CPC

Calcined petroleum coke is used as the carbon additive in steel mills and foundry plants.

CHEMICAL PROPERTIES

Unit
Limit Value

A
B

FC
%
98.5 min
98.5 min

S
%
0.5 max
0.8max

Ash
%
0.8 max
0.9max

Volatile Matter
%
0.7 max
0.8max

Moisture
%
0.5 max
0.5max

PHYSICAL PROPERTIES

Size
mm
0~1 and 1~10 (90% min)

or as per buyer's requirement

PACKING

25kgs/bag or 1000kgs/jumbo bag

Thursday, October 6, 2011

low sulphur carbon additive

low sulphur carbon additive: T9850
carbon content: 98.5-99%
S content: 0.5%
Ash: 0.5%, Moisture: 0.5%
Size:1-5mm for casting
low sulphur carbon additive
carbon content: 98.5-99%
S content: 0.5%
Ash: 0.5%
Size:1-5mm or as customer requirement

low sulphur carbon additive has been widely used for steel-smelting, casting, brake pedal and friction material.

low sulphur carbon additive is made from excellent qualtiy carbon material, after process of desulfurizing and grain size classification, they can improve technics and steel dreg, reduce the cost of casting .

1.usage: as carbon additive in special type steel-making and ball iron casting.

2. characters: high carbon content, low sulphur, nitrogen and harmful impurities, efficient and stable, high absorbability of carbon.

3. Avaliable range: various steel refoundry, casting.

4. Normal size: 1-5mm, 2-6mm,0-3mm, other size can accord to customer requirement.

low sulphur carbon additive

low sulphur carbon additive: T9850
carbon content: 98.5%
S content: 0.5%
Ash: 0.5%, Moisture: 0.5%
Size:1-5mm for casting
low sulphur carbon additive
carbon content: 98.5%
S content: 0.5%
Ash: 0.5%, Moisture:0.5%
Size:1-5mm ,2-6mm for casting or as customer requirement.

low sulphur carbon additive has been widely used for steel-smelting, casting, brake pedal and friction material.

low sulphur carbon additive is made from excellent qualtiy carbon material, after process of desulfurizing and grain size classification, they can improve technics and steel dreg, reduce the cost of casting .

1.usage: as carbon additive in special type steel-making and ball iron casting.

2. characters: high carbon content, low sulphur, nitrogen and harmful impurities, efficient and stable, high absorbability of carbon.

3. Avaliable range: various steel refoundry, casting.

4. Normal size: 1-5mm, 2-6mm,0-3mm, other size can accord to customer requirement.

low sulphur carbon additive

low sulphur carbon additive
F.C 98.5%
S :0.5%, Moisture: 0.5%
Ash: 0.5%
Size: 1-5mm or as customer requirement
Product characteristics and application scope:
high content of fixed carbon, low sulfur content, stable carburetion effect and high absorptivity of carbon, best degree of graphitization, improve the nucleation of melted iron, it is mainly applied to the carburetion of various electro-smelting cast steel and iron casting.

Recommended method of application:
A. adjust carbon content while blending, add it into the place below the middle part of the electric furnace along with metal furnace charge when melting down liquid steel(iron) in accordance with the requirement of carbon content, absorptivity of carbon could reach 90%-95%, during strong carburant residue shall not appear, otherwise it is easy to be wrapped in the non-waste residue and influence the absorption of carbon thereby;

Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer's requirement.

Specification of Tennry carbon additive:
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%

T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm

Any other specification of carbon additive please contact us .

low sulphur carburant

low sulphur carburant: T9850
carbon content: 98.5-99%
S content: 0.5%
Ash: 0.5%, Moisture: 0.5%
Size:1-5mm for casting
low sulphur carburant:
carbon content: 98.5-99%
S content: 0.5%
Ash: 0.5%
Size:1-5mm

CARBURANT has been widely used for steel-smelting, casting, brake pedal and friction material.

Tennry Carburant is made from excellent qualtiy carbon material, after process of desulfurizing and grain size classification, they can improve technics and steel dreg, reduce the cost of casting .

1.usage: as carbon additive in special type steel-making and ball iron casting.

2. characters: high carbon content, low sulphur, nitrogen and harmful impurities, efficient and stable, high absorbability of carbon.

3. Avaliable range: various steel refoundry, casting.

4. Normal size: 1-5mm, 2-6mm,0-3mm, other size can accord to customer requirement.

low sulphur carburant

low sulphur carburant:
F.C 98.5-99%
S 0.05% ,Moisture: 0.5%
Ash:1-5mm
Size: 1-5mm or as clinets requirement.
low sulphur carburant characteristics and application scope: high content of fixed carbon, low sulfur content, stable carburetion effect and high absorptivity of carbon, best degree of graphitization, improve the nucleation of melted iron, it is mainly applied to the carburetion of various electro-smelting cast steel and iron casting.

Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer’s requirement.

Specification of Tennry carbon additive:
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%

T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm

Any other specification of carbon additive please contact us .

low sulphur graphited petroleum coke

Graphited petroleum coke :
F.C 98.5-99%
S 0.05% , Moisture: 0.5%
Ash: 0.5%
Size: 1-5mm or as clinets requirement.
graphited petroleum coke characteristics and application scope: high content of fixed carbon, low sulfur content, stable carburetion effect and high absorptivity of carbon, best degree of graphitization, improve the nucleation of melted iron, it is mainly applied to the carburetion of various electro-smelting cast steel and iron casting.

Granularity:
Common granularity:0-5mm, 0.5-5mm, 1-3mm, 1-4mm, 1-5mm or supplied according to customer’s requirement.

Specification of Tennry carburant:
NO.
Fixed Carbon
Sulphur
Moisture
Volatile
Graininess
>=
<=
<=
<=
Granularity distribution 90%

T9805
98.50%
0.05%
0.50%
0.50%
1-5mm
T9850
98.50%
0.50%
0.50%
0.80%
1-5mm
T9630
96.00%
0.30%
0.22%
1.12%
1-5mm
T9530
95.00%
0.30%
0.26%
1.14%
1-4mm
T9030
90.00%
0.30%
0.30%
1.20%
1-5mm
T8020
80.00%
0.20%
1.30%
3.50%
1-5mm

Any other specification of carbon additive please contact us .

lowest price petroleum coke for steel making

petroleum coke
1.good quality
2.fast delivery
3.FCC,RoHs

petroleum coke
petroleum coke

FC: 98.5% Min
S : 0.5 % Max
Ash: 0.8% Max
VM : 0.6 % Max
Moisture: 0.5% Max
Size: 0.5- 5 mm ( 90 % Min) or as your demand
Main Products:
raw petroleum coke,calcined petroleum coke,carbon additive

My company production of friction materials for petroleum coke,it selects and uses high grade oil coke and completed after 1300high temperature calcining through 8 fire-ways and 24 calciners.
Product has the following features:
(1) It is characterized by less density,Loose texture and porous.
(2) High carbon,a less volatile,the chemical and physical properties is very stable.
(3) And according to the foreign material and product manufacturing, and the strict screening, have fixed the grain size composition is especially suitable for friction materials and application effect.
(4)Friction material used petroleum coke can Lower density,Improve product porosity and compression performance.
Thereby improving brake friction performance and stability of comfort and process performance.

Application
1.this product can be used in steel producing as a kind of carbon additive
2.we can get high quality steel if use it .
3.it can also be used in special steel producing and casting or other related industry
4.It can be used as carbon raiser (Recarburizer) to produce high quality steel,cast iron and alloy.
5.It can also be used in plastic and rubber as an additive.
It can be used as carbon raiser (Recarburizer) to produce high quality steel,cast iron and alloy.It can also be used in plastic and rubber as an additive.

medium sulphur calcined petroleum coke for aluminum manufacturers

CPC Calcined petroleum coke:
FC: 98.5%min
Sulphur: 1.3% max
Moisture: 0.5% max
High quality, better service, low price.
CPC low sulphur
calcined petroleum coke:

FC: 98.5%min
Sulphur: 1.3% max
Moisture: 0.5% max
Size: subject to customers` requirements.
Packing: subject to the customers` requirements.
Quantity : available on request
Origin: Panjin China
Delivery time: available on request
Delivery condition:
CIF &FOB or upon client`s request
FOB at Dalian Port ,BaYuquan Port, JinZhou Port,Tianjing Port
Price:different upon your ordered size
Payment terms: LC at sight or T/T 30% in advance
PANJIN G-HIGH CARBON specializes in producing calcined petroleum coke and other carbon products, hoping to build the cooperation with you.

medium sulphur calcined petroleum coke for aluminum manufacturers

.F. C.: 98%; S: 2%;
2.V. M.: 1.50%max;
3. Ash: 3.0%max;
4.Moisture: 1.0%max;
5.Size: 1-5mm petroleum coke
Cheap calcined petroleum coke 98% carbon
By using the calcined petroleum coke from Fuhao in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, Fuhao calcined petroleum coke has follow properties ; high absorptive character, no residue will be left, save production cost.
1,
Usage
:used to improve the Carbon content in steel-melting and Ductile iron foundry
2,
Characteristic
:high carbon, low sulfur, with stable effect for improving the carbon content, high absorptive of carbon.
3,
apply
: Used in electric furnace steel smelting and cast-iron for improving the carbon content
4,
Grain size
:normal size:0.3-3mm 1-4mm,1-3mm,3-5mm,3-8mm,5-10mm or per as customer’s special requirement

met coke(10-25mm)

our shanxi met coke with best quality and competitive price
[1]Met Coke
In a coke furnace, coal is heated indirectly (for 14 to 18 hours at 1,200 to 1,300°C) and then carbonized (dried by distillation) for about 24 hours.
Subsequently, it is fractionated into coke and other materials, such as gases, tar oil, benzene, toluene, and naphthalene.
Metallurgical coke has an 85 to 90% fixed carbon content.
[2] specification
F.C.: 85% MIN ASH: 13% MAX SULFUR :0.7% MAX
V.M. :1.5 MAX MOISTURE : 6% MAX
M40 : 78%-83% MIN
M10 : 8%-10% MAX
CSR : 60% MIN
CRI (≤ %) : 23% MIN
Size:10-25mm 90%min

if you are interested , please inform us as sonn as possible

Calcined Petroleum Coke

Best price of Calcined petroleum coke, Graphite powder/electrode/scrap etc.
FC: 98.5%, 99%
S: 0.5%
Dear Sir

We can supply different specification of Calcined Petroleum Coke according client's requirement. If you are interested in our products, please feel free to contact us at any time, We will supply you good service and best price.

Thank you and best regard
Shi Liping
Tel: 86-353-6667761
Fax: 86-353-2023213

met coke

we can supply best quality , competitive price and best service

WE, , XIWO INDUSTRIAL(HONGKONG)LIMITED. HEREBY CONFIRM, STATE AND REPRESENT WITH FULL CORPORATE AUTHORITY, THATWE ARE READY, WILLING AND ABLE TO SELL METALLURGICAL COKE BULK IN QUANTITY AND AS PER THE SPECIFICATIONS BELOW:
SPECIFICATION 1:

F.C.: 86% MIN ASH: 12.5% MAX SULFUR :0.6% MAX
V.M. :1.3 MAX MOISTURE : 6% MAX
M40 : 78%-83% MIN
M10 : 8%-10% MAX
CSR : 62% MIN
CRI (≤ %) : 23% MIN
Size:30-90mm 90%min
Quantity:2000mt
Price : FOB TIANJIN XINGANG 535usd
LOADING PORT: TIANJIN XINGANG PORT

met coke

our best quality with bext price
met. coke
size: 10-30mm 90%min
volattile matter 1.7%max
fixed carbon 84%min
moisture 8%max
sulfur 0.6%max
ash 13%max

met coke

Metallurgical coke is produced by carbonization of coals or coal blends at temperatures up to 1400 K
[1]Met Coke
In a coke furnace, coal is heated indirectly (for 14 to 18 hours at 1,200 to 1,300°C) and then carbonized (dried by distillation) for about 24 hours.
Subsequently, it is fractionated into coke and other materials, such as gases, tar oil, benzene, toluene, and naphthalene.
Metallurgical coke has an 85 to 90% fixed carbon content.
[2] specification
F.C.: 86% MIN ASH: 12.5% MAX SULFUR :0.6% MAX
V.M. :1.3 MAX MOISTURE : 6% MAX
M40 : 78%-83% MIN
M10 : 8%-10% MAX
CSR : 62% MIN
CRI (≤ %) : 23% MIN
Size:50-100mm 90%min

if you are interested , please inform us as sonn as possible

met coke

best quality , competitive price
our high S met coke specifications are as follows:

fixed carbon: 84%

ash 13.5%

s 1.5%

vm 1.6%

mositure 7%
size at client's requirements

metallurgical coke 30-90mm

we can supply u good quality with competitive price from shanxi .
[1]Met Coke
In a coke furnace, coal is heated indirectly (for 14 to 18 hours at 1,200 to 1,300°C) and then carbonized (dried by distillation) for about 24 hours.
Subsequently, it is fractionated into coke and other materials, such as gases, tar oil, benzene, toluene, and naphthalene.
Metallurgical coke has an 85 to 90% fixed carbon content.
[2] specification
F.C.: 86% MIN ASH: 12% MAX SULFUR :0.6% MAX
V.M. :1.5 MAX MOISTURE : 5% MAX
M40 : 78%-83% MIN
M10 : 8%-10% MAX
CSR : 63% MIN
CRI (≤ %) : 23% MIN
Size:30-90mm 90%min

if you are interested , please inform us as sonn as possible

metallurgical coke/ broken prebaked carbon anode

PANJIN G-HIGH CARBON specializes in manufacturing carbon products. Always tries to offer even lower price and better service.
With better specifications than metallurgical coke and similar price as metallurgical coke, broken prebaked anode is more and more welcomed by customers from both inside and outside China.
FC:95% min
S: 1-1.2%
VM: 1% max
Size: subject to customers` requirements.
Packing: subject to the customers` requirements.
Quantity : available on request
Origin: Panjin China
Delivery time: available on request
Delivery condition:
CIF &FOB or upon client`s request
FOB at Dalian Port ,BaYuquan Port, JinZhou Port,Tianjing Port
Price:different upon your ordered size
Payment terms: LC at sight or T/T 30% in advance

metallurgical coke/ broken prebaked carbon anode

PANJIN G-HIGH CARBON specializes in manufacturing broken anode. It has better specifications than metallurgical coke.
Broken anode is also used for training metal.
With better specifications than metallurgical coke and similar price as metallurgical coke, broken prebaked anode is more and more welcomed by customers from both inside and outside China.
FC:95% min
S: 1-1.2%
VM: 1% max
Size: subject to customers` requirements.
Packing: subject to the customers` requirements.
Quantity : available on request
Origin: Panjin China
Delivery time: available on request
Delivery condition:
CIF &FOB or upon client`s request
FOB at Dalian Port ,BaYuquan Port, JinZhou Port,Tianjing Port
Price:different upon your ordered size
Payment terms: LC at sight or T/T 30% in advance

metallurgical coke

low ash ,low s ,and best quality , competitive price
our low ash met coke specifications are as follows:

fixed carbon: 87%
ash 11%
s 0.6%
vm 1.4%
size 30-90mm.20-80mm,30-60mm

metallurgical coke

We can supply you all kinds of metallurgical coke.
Commodity:Metallurgical Coke
Specs(Physical & ChemicalProperties):

Moisture 8.00% max
Ash 13.50% max
V.M. 2.00% max
Sulphur 0.70% max
P 0.035% max

Size: 5-15 mm
Size: 30-90 mm
Size: 5-12 mm

Calcined Petroleum Coke

Calcined Petroleum coke (often abbreviated petcoke) is a carbonaceous solid derived from oil refinery coker units or other crack

Calcined Petroleum Coke

Fixed carbon: 98.5% min
Ash: 0.50%, 0.70% max
sulphur: 0.50% max
Moisture: 0.50% max
Volatile matter: 0.70% max
Size: 0-4mm, 1-5mm, or as buyer's option
Packing: in 1MT bag, or in 25kg bag then in 1MT bag

metallurgical coke

Our coke is mainly used in blast furnace ironmaking and non-ferrous metal smelting of blast furnace
Our coke with good chemical and physical properties, including smelting process one-dimenion thermal properties. Our coke except used extensively for iron and non-ferrous metal smelting (YeJinJiao) outside, also used in casting, chemical, calcium carbide and ferroalloy, its quality requirements different. We also provide casting use coke, general granularity, porosity, low carbon fixed high and low sulfur

metallurgical coke

METALLURGICAL COKE
ITEM: METALLURGICAL COKE
SPECS: ASH:12.5%MAX FC:86%MIN S:0.7%MAX V.M.:1.5%MAX MOISTURE:5%MAX
SIZE:25-60MM90%MIN 30-80MM90%MIN 60-100MM90%MIN 80-120MM%90%MIN
PACKING: LOOSE IN BULK OR IN BULK BY CONTAINER OR IN BAGS

metallurgy coke

metallurgy coke has been widely used for steel-smelting, casting, brake pedal and friction material.

Duratight metallurgy coke has the features of high carbon,low sulphur,nitrogen and harmful impurities. So it has been widely used for steel-smelting, casting, brake pedal and friction material.
Product Specification
Product No.
Fixed Carbon
Sulphur
Ash
V.M.
Moisture
Min
Max
Max
Max
Max
DT-CA-01
98.00%
0.50%
1.00%
1.00%
0.50%
DT-CA-02
98.50%
0.50%
0.80%
0.80%
0.50%
DT-CA-03
98.00%
0.50%
0.80%
0.80%
0.50%
DT-CA-04
98.50%
0.50%
0.50%
0.50%
0.50%
DT-CA-05
98.50%
0.30%
0.80%
0.80%
0.50%
DT-CA-06
99.00%
0.30%
0.50%
0.50%
0.50%
DT-CA-07
99.00%
0.30%
0.50%
0.50%
0.50%
DT-CA-08
97%
0.05%
1.20%
1.20%
0.50%
DT-CA-09
98.50%
0.05%
0.50%
0.50%
0.50%
DT-CA-10
95%
0.30%
3.50%
1.50%
0.50%
DT-CA-11
99%
0.03%
0.50%
0.50%
0.50%
Remark:The above mentioned grain sizes are recommended standard. If your have special requirements, please feel free to contact Duratight enginering department.

middle sulphur calcined petroleum coke for aluminum manufacturers

CPC Calcined petroleum coke:
FC: 98.5%min
Sulphur: 1.3% max
Moisture: 0.5% max
High quality, better service, low price.
CPC low sulphur
calcined petroleum coke:
FC: 98.5%min
Sulphur: 1.3% max
Moisture: 0.5% max
Size: subject to customers` requirements.
Packing: subject to the customers` requirements.
Quantity : available on request
Origin: Panjin China
Delivery time: available on request
Delivery condition:
CIF &FOB or upon client`s request
FOB at Dalian Port ,BaYuquan Port, JinZhou Port,Tianjing Port
Price:different upon your ordered size
Payment terms: LC at sight or T/T 30% in advance
PANJIN G-HIGH CARBON specializes in producing calcined petroleum coke and other carbon products, hoping to build the cooperation with you.

natural coal carburant TT-ZTJ-014

Calcined petroleum coke /CPC
Other name: CPC,carbon additive, carburizer, carbon raiser, carburant.
Calcined petroleum coke

C

S

P

H
2
0

Size

Ash

Volatile weight

≥
90%
≤
0.5%
≤
0.4%
≤
0.5%
1-3mm
7%
≤
1.5%

≥
91%
≤
0.5
≤
0.4%
≤
0.5%
3-5mm
7%
≤
0.5%

≥
92%
0.3%
≤
0.4%
≤
0.5%
3-5mm
≤
5%
≤
1.5%

≥
93%
0.2%
≤
0.4%
≤
0.5%
3-5mm
≤
4%
≤
1.5%

95.5%
0.16%
≤
0.4%
≤
0.5%
1-5mm
≤
4%
≤
1.5%

nut coke

1.high carbon and low sulfur
2.widely used in steelworks
3.good quality and resonable price
4.stable production line &ability
ITEMS
UNIT
BRAND
CA-1
CA-2
CA-3
CA-4
Water
MAX
%
0.5
0.5
0.5
0.5
Volatile
MAX
%
0.6
1.0
1.2
1.5
Sulfur
MAX
%
0.5
0.4
0.3
0.2
N
MAX
%
0.8
0.4
0.3
0.2
ASH
MAX
%
0.5
3.0
4.0
8.0
F.C.
MIN
%
98.0
94.0
92.0
90.0
calcined petroleum coke is use as the carbon additive in steel mills and foundry plants made cathode or anode for Aluminum plant
Widely used in steel-metallurgy as the raw-material of graphite electrode, in aluminum-metallurgy as carbon resources and the stuff of graphite paste for electrobath. It is also used to make carborundum, calcium carbide and other carbon products.

Wednesday, October 5, 2011

offer CPC low sulphur calcined petroleum coke

Calcined petroleum coke:
FC: 98%min
Sulphur: 0.5% max
Moisture: 0.5% max
high quality, better service, lower price
CPC
Calcined petroleum coke:
Size: subject to customers` requirements.
Packing: subject to the customers` requirements.
Quantity : available on request
Origin: Panjin China
Delivery time: available on request
Delivery condition:
CIF &FOB or upon client`s request
FOB at Dalian Port ,BaYuquan Port, JinZhou Port,Tianjing Port
Price:different upon your ordered size
Payment terms: LC at sight or T/T 30% in advance
PANJIN G-HIGH CARBON specializes in producing calcined petroleum coke and other carbon products, hoping to build the cooperation with you.

pet petroleum coke

pet petroleum coke
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
pet petroleum coke
Graphite petroleum coke:
1,F. C.: 98.5%; S: 0.05%;
2,V. M.: 0.50%max; Ash: 0.5%max;
3,Moisture: 1.0%max; Size: 1-5mm
Quick Details
pet petroleum coke
:
F. C.: 80%; S:0.5%; V. M.: 10%max; Ash: 0.5%max; Moisture: 8%max; Size: 1-5mm
By using the green petroleum coke from QJ in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, QJ calcined petroleum coke has follow properties ; high absorptive character, no residue will be left, save production cost.
1,
Usage
:used to improve the Carbon content in steel-melting and Ductile iron foundry
2,
Characteristic
:high carbon, low sulfur, with stable effect for improving the carbon content, high absorptive of carbon.
3,
apply
: Used in electric furnace steel smelting and cast-iron for improving the carbon content
4,
Grain size
:normal size:0.3-3mm 1-4mm,1-3mm,3-5mm,3-8mm,5-10mm or per as customer’s special requirement.
pet Petroleum coke

Place of Origin:
Henan China (Mainland)
Brand Name:
QJ
Model Number:
QJ-41
Application:
Iron and casting
Shape:
Carbon Blocks
Dimensions:
1-5mm
Product Type:
Carbon Additive
C Content (%):
98%
Working Temperature:
1600°C
S Content (%):
0.05%MAX
N Content (%):
0.3%
Ash Content (%):
0.5%
Volatile:
0.5%
color:
Black
material:
Carbon
Packaging & Delivery
Packaging Detail:
Waterproof ton bags (with small bag inside) 2.20kgs/25kgs paper bag, 40 bags in one MT-bag 3.20kgs/25kgs/30kgs waterproof PP Woven Bag bags, 1000kg in one MT-bag
Delivery Detail:
30Days

pet coke/petroleum coke

we have best supplier
our raw material is high-quality low sulfur petcoke
the cost performance of our product is high
petroleum coke specification
Property Unit Range Standard
Sulfur % 0.5 SH/T 0033
Volatile matter % 12 SH/T 0032
Ash % 0.5 GB/T 387
Moisture % 11 SH/T 0029
Real density g/cm3 2.30 SH/T 0026
Size smaller than 8mm % 37.00 ——

Petroleum coke (Pet coke/Petcoke)is a solid high carbon material which is produced as a by-product of the oil refining process. The chief constituent of petroleum coke is hydrocarbon (carbon content of 90-97%, hydrogen content of 1.5-8%), but it also contains nitrogen, chlorine, sulfur compounds and heavy metals. So the color of petroleum coke is black or dark gray.
According to different quality, the petroleum coke can be used in manufacturing graphite, metal smelting industry and chemical industry. The main product of our company is high-quality low sulfur coke (the sulfur content of less than 0.5%) that is mainly used in preparing high power graphite electrode for the steel and aluminium industries and producing some special carbon products. And it is particularly valuable because the electrodes must be replaced regularly and the coke is produced exclusively from sweet crude oil, which is in diminishing supply.
After calcining at high temperature, Petroleum coke can be transformed into Calcined Petroleum Coke(CPC)which is the important raw material of electrode paste and pre-baked anode.

pet coke

We believe our superior pet coke can meet your requirements!
pet coke
Item
F.C
98%, 98.5%
Min.
1
Sulphur
0.5%
Max.
2
Ash
0.7%
,
0.8%, 1%
Max.
3
V.M.
0.5%
,
0.8%, 1%
Max.
4
Moisture
0.5%
,
0.8%, 1%
Max.
The size varies such as 1-4mm, 5-10mm, 0.4-4mm.We always produce according to customers requirement.
Useage:
The main use of CPC is in the production of anodes for the Aluminum Smelting process. 70 - 80% of CPC is for the Aluminum Industry. The reason for use in the Aluminum Industry is for conductivity. Another use for CPC is TiO2 production which accounts for 10 15% of the CPC consumption. The purpose use in TiO2 is for its oxidizing effect. Metallurgical Industry is the remaining major area where CPC is used. The reason for use in Metallurgical Industry is the high Fixed Carbon level (low ash level) and moderate sulfur levels.